|
|
Fastening in a
single operation
With
the SFS system for attaching wooden floors to metal frames you work
reliably and efficiently with a single tool in a single operation.
Drilling, thread forming
and fastening, all in a single operation. The conventional separate
operations are eliminated:
No
pre-drilling, no tool changes, no
laborious installation of self tapping fastener.The
appropriate setting tool CF250
or CF250P
not only improves efficiency, it offers the
user an ideal, fatigue-free working position.
|
|
|
 |
SCT
Ø 8,0:
All
varieties of wood on high tensile steel cross members (micro-alloyed fine
grain steel) up to 700 N/mm² tensile strength.
| Thread
diameter: |
8,0
mm |
| Drive: |
Torx
T40 |
| Head |
Countersunk
head Ø15 mm |
| Material: |
Carbon
steel, case hardened |
| Drill
point: |
High-performance
drill point |
| Surface
finish: |
Organic
zinc coating |
| Performance: |
3 -
7 mm fine grain steel up to 700 N/mm² tensile strength
4 - 10 mm general
structural steel |
|
|
 |
SCT
Ø 6,3:
All
varieties of wood on high tensile steel cross members (micro-alloyed fine
grain steel) up to 700 N/mm² tensile strength.
| Thread
diameter: |
6,3
mm |
| Drive: |
Torx
T30 |
| Head: |
Countersunk
head Ø 12 mm |
| Material: |
Carbon
steel, case hardened |
| Drill
point: |
High-performance
drill point |
| Surface
finish: |
Zinc
electroplated and chromated |
| Performance: |
3 -
6 mm fine grain steel up to 700 N/mm² tensile strength
3 - 10 mm general
structural steel |
|
|
  |
SC
Ø 6,3:
All
varieties of wood on steel cross members St37-2 to St52-3
| Thread
diameter: |
6,3
mm |
| Drive: |
Torx
T30 |
| Material: |
Carbon
steel, case hardened |
| Surface
finish: |
Zinc
electroplated and chromated |
| Performance: |
3 -
6 mm St37-2, St52-3 |
.
SC Ø 5,5:
Wood
matched to the headstyle on steel cross members St37-2 to St52-3.
| Thread
diameter: |
5,5
mm |
| Head: |
Double
countersunk head for softwood
Countersunk head
for plywood and hardwood |
| Drive: |
Torx
T30 |
| Material: |
Carbon
steel, case hardened |
| Surface
finish: |
Zinc
electroplated and chromated |
| Performance: |
2 -
5 mm St37-2, St52-3 |
|
|
  |
SC
Ø 4,8:
Softwood
and medium-hard wood on lightweight steel subframes.
| Thread
diameter: |
4,8
mm |
| Drive: |
Cross-slotted
drive No.2 form H |
| Material: |
Carbon
steel, case hardened |
| Surface
finish: |
Zinc
electroplated and chromated |
| Performance: |
2 -
3 mm St37-2, St 52-3 |
SC
Ø 4,2:
Softwood
and medium-hard wood on lightweight steel subframes.
| Thread
diameter: |
4,2
mm |
| Drive |
Cross-slotted
drive No.2 form H |
| Material: |
Carbon
steel, case hardened |
| Surface
finish: |
Zinc
electroplated and chromated |
| Performance: |
0,7
- 2 mm St37-2, St52-3 |
|
|
Due to the wide
variety of applications and fastening systems, the above list is only a selection from the complete range. If
your specific application is not mentioned here, please contact
us at 714.558.9381 or email
us for more information.
SFS Home
I SCT/SC I SCI I SFS
Tools
Products
I Standard
Fasteners I Engineered Fastening I Military
Standards I Specials
|
