|
| Installation Tools - SFS
intec |
|
Installation
in one operation
The SFS intec floor fastening system enables fast, efficient,
ergonomic assembly of wooden floors to metal cross members in
one operation with no pre drilling.
Our specially designed installation tools, CF250 or CF250P, are
not just economical; they enable fast, efficient and ergonomic
installation while preventing repetitive stress injuries to the
operators.
|
|
|
|
|
|
CF250
The CF250 is the ideal ergonomic solution for
semi-automatic fastening with SC and SCT fasteners.
Recommended for use with all floor fixings in short runs
and for uneven floors.
Technical
Data:
| Fastener
length: |
25
to 120 mm |
| Head
diameter: |
10,
12, 15 mm |
| Power
source: |
220
V / 110 V |
| Power: |
740
W |
| Speed: |
1560
r.p.m. |
| Dimensions: |
190
x 390 x 1080 mm |
| Weight: |
9,8
Kg |
|
|
|
CF250P
With its pneumatic feed, the CF250P is the
ideal ergonomic solution for semi-automatic fixing with SC and
SCT fasteners. Recommended for use with SCT Ø 8,0 mm and for frequent
use in series production.
Technical
Data:
| Fastener
lenght: |
25
to 120 mm |
| Head
diameter: |
10,
12, 15 mm |
| Power
source: |
220
V / 110 V |
| Power: |
740
W |
| Speed: |
1560
r.p,m. |
| Dimensions: |
300
x 390 x 1080 mm |
| Weight: |
26.1
Kg |
|
|
|
CF40-12R
Recommended for replacement of floor areas or individual
fasteners with 12 mm head diameters.
Technical
Data:
| Fastener
length: |
min.
45 mm |
| Head
diameter: |
12
mm |
| Power
source: |
220
V |
| Power: |
500
W |
| Speed: |
0
- 1150 - 2100 r.p.m. |
| Length: |
470
mm |
|
|
|
 |
Ergonomic
operation
The ergonomic considerations which were so important
in developing the CF250 greatly reduce the strain on
the back, shoulders and knees when fixing with SFS fasteners.
The pneumatic feed of the CF250P serves to virtually
eliminate repetitive strain, and makes for easy operation with
greatly reduced health risks.
Your benefit: continuously high operating cycles.
|
 |
|
ISO
9001 / EN 29001 quality guarantee
SFS quality assurance meets the requirements of
international standards for quality management and
quality systems embodied in ISO 9001 / EN 29001, ISO
14001 and VDA 6. We have the quality of our products
under close control from the raw material to their
delivery, and we can guarantee their technical
characteristics.
Due to the wide
variety of applications and fastening systems, the
above list is only a selection from the complete
range. If your specific application is not mentioned
here, please contact us at
714.558.9381 (Fax: 714.541.4491) or email us at sales@jetfitting.com.
|
|
