| Model 9600
Model 9600 is a manually-operated
"squeeze" tool to install blind threaded inserts. It is designed
for use where a compressed air source is unavailable.
Available nose assembly conversion kits allow
installation of blind threaded inserts from 4-40 to 3/8 Imperial, M3 to
M10 Metric. Tool kits are available for prototyping, re-work and
maintenance applications.
Dimensions are approximately 10-1/2" x
7-1/4" in the "open" position.
|
 |
| Model 7556 and Model 7557
The 7556 and 7557 are high-production, rugged,
lightweight "spin-spin" tools utilizing an internal
torque-sensing clutch for consistent blind threaded insert placement.
These tools permit complete portability on any assembly line, and have
been used in industry for many years because of their durable and
reliability.
|
Model 7556 Range
|
Most styles of inserts from 4-40 to
#10 Imperial, M3 to M8 Metric.
|
|
Weight
|
3.9 lbs (1.76 kg)
|
|
Motor Speed
|
1,000 RPM @ 75 psi (5 bar)
|
|
Cycle Time
|
Approximately 3 seconds
|
|
|
|
Model 7557 Range
|
Most styles of inserts from 6-32 to
1/4 Imperial, M5 to M10 Metric.
|
|
Weight
|
3.64 lbs (1.65 kg)
|
|
Motor Speed
|
550 RPM @ 75 psi (5 bar)
|
|
Cycle Time
|
Approximately 3 seconds
|
|
 |
|
Model 7572
Model 7572 incorporates all the features of the
7556/7557 series tools in a smaller, lighter "in-line" style.
|
Model 7572 Range
|
Most styles of inserts from 4-40 to
#10 Imperial, M3 to M6 Metric.
|
|
Weight
|
2.5 lbs (1.15 kg)
|
|
Motor Speed
|
900 RPM @ 75 psi (5 bar)
|
|
Cycle Time
|
Approximately 3 seconds
|
|
 |
| Model 07420
Lightweight and ergonomically designed, the Model
742 tool is a pneumatic-hydraulic "spin-pull" type tool. Blind
threaded inserts are installed with a simple "spin-on, pull-up,
spin-off" sequence utilizing a fast and simple one-step trigger. The
extensive working range includes M3 to M10 Metric and 4-40 to 5/16
Imperial, including some M12 and 3/8 variants.
|
Weight
|
4.85 lbs (2.2 kg)
|
|
Stroke
|
.276" (7mm)
|
|
Pull Force
|
4,380 lbf @75 psi (19.5 kN @ 5 bar)
|
|
 |
| Model 74401
The remote-head Model 744 tool is designed for
placement of large-diameter blind threaded inserts. The separate hydraulic
system generates power to pull large diameter inserts while using a small
lightweight placing head. The 744 uses a fast and simple one-step trigger
to "spin-on, pull-up, spin-off" all blind threaded inserts from
M3 to M12 Metric and 4-40 to 3/8 Imperial. Available options include
special-purpose "in-line head" and foot-pedal actuation.
|
Weight (head)
|
4.5 lbs (2 kg)
|
|
Stroke
|
552" (14mm)
|
|
Pull Force
|
8,220 lbf @75 psi (36.6 kN @ 5 bar)
|
|
|
Blind Threaded
Insert Placement Tool Matrix
To view the recommended tool used to pull
your fastener, click here
For a complete list of Avdel Cherry Placement Tools, click
here
Standard
Fasteners I Engineered Fastening I Military
Standards I Specials
|
