 |
1.
Engage all threads of the fastener on the pull-up stud. Advance
anvil until it is tight on head of fastener. Insert fastener
into installation hole. |
 |
2.
Place hex wrench in socket of jackscrew and hold stationary.
Turn hex nut in clockwise direction with a wrench while holding
tool at right angle to the work.
3.
Turn nut the required number of turns---or until firm resistance
indicates a complete upset of the fastener. (A box end ratchet
wrench will speed up this operation) |
 |
4.
Break nut loose with counter clockwise movement. Remove both
wrenches from the tool |
 |
5.
Remove tool from fastener by revolving entire tool in counter
clockwise direction. |
